Replacement of kitchen sink - inlet and sewer installation replacement
First of all, the installation of the faucet inlet pipe, this step is very important, we will be installed in the faucet on the side of the inlet pipe connected to the inlet switch, the installation should pay attention to the convergence of the firm, not strong, then may lead to leakage and other issues Serious may be directly to the sink can not be used, but also pay attention to a detail, that is, hot and cold water pipe position, not confused.
Then install the overflow hole of the water pipe, overflow hole is to avoid the overflow of the water tank to protect the hole, so when installing the overflow hole in the water pipe, pay attention to its convergence with the tank at the seal, to ensure that the overflow hole of the water pipe itself Not leaking. Followed by the installation of the basket basket, filter basket under the water pipe in the installation, the main attention between the water pipe and the convergence between the tank, not only to be strong, but also to seal.
Replacement of kitchen sink - drain and reinforcement tank installation replacement
The installation of the overall drainage pipe, usually people will buy two filter basket sink, but the distance between the two pipes near the workers in the installation, according to the actual situation of the matching drainage pipe cutting, this time Pay attention to the sealing between each interface, common water leakage problems occur in these convergence.
Finally install the coupon reinforcement tank, the sink into the table, the need for the tank and the table between the installation of supporting the coupons, the tank installed firmly, to avoid small gaps led to the tank around the shaking. Here we installed the kitchen sink to complete, we have to pay attention to the installation after the completion of the inspection to see if there are other problems and then try and found that there is no problem on the official put into use.