Home > Exhibition > Content

60/40 kitchen sinks

May 19, 2017

In the selection of 60/40 kitchen sinks, the first should consider the depth, some imported water basins are not suitable for domestic large pots. Second is the size, the bottom of the moisture-proof measures are not to be omitted, and pay attention to the following points.

1, according to the width of the cabinet counter determines the breadth of the sink, the general width should be the table width minus 10-15 cm.

2, the choice of stainless steel sink, the thickness of the material to moderate, too thin will affect the service life and strength of the flume, too thick easily damaged the washing utensils. In addition to the surface roughness of stainless steel, such as uneven description of poor quality.

3, usually, the cleaning volume of a larger flume practicability, depth of about 20 centimeters better, so as to prevent splashing outside.


4, sinks surface treatment to matte for the beautiful and practical, sink welding place to be carefully observed, the weld must be evenly formed, no rust.

5, handsome in appearance, reasonable design, with overflow mouth as good.


In addition, the kitchen sinks is mainly divided into single groove, double Groove and three slots. Single-trough is often a small kitchen space for the use of families, because the single slot is inconvenient to use, so can only meet the most basic cleaning functions. And double trough most families use, no matter two rooms or three rooms, double grooves that can meet the needs of cleaning and separate treatment. And the three-groove because of the more special-shaped design, more suitable for a personalized style of the large kitchen, because it can be soaked at the same time and washing and storage and many other functions, so this kind of sink is very suitable for large-style villas and other kitchen.